STEP 10: iNSTALLiNG THE GRiLL DOORS
See Figure 15.
Holding the grill door (left) securely, slide the pin in
the bottom of the door into the hole in the base of the
cabinet.
Align the hole in the top of the door with the hole (left
side) in the front panel.
From inside the cabinet, slide the pin (GG) in the hole
in the front panel and through the hole in the top of the
grill door.
Repeat above steps for the right grill door.
front
panel
hole
pin
grill
door
Fig. 15
STEP 11: iNSTALLiNG THE GREASE TRAy
AND cUP
See Figure 16.
From behind the grill, slide the grease tray into the tray
holders.
With the grease tray firmly in place, slide the grease
cup into the cup holders on the bottom of the grease
tray.
NOTE: Clean the grease tray and cup after each use.
Do not remove the grease tray and cup until after the
grill has completely cooled.
ASSEMBLY
pin (gg)
base
Fig. 16
STEP 12: ATTAcHiNG SPicE RAcK TO GRiLL
DOOR
See Figure 17.
Tilt bottom spice rack so that the hanging wire and
holes in the left grill door align.
Place wire in holes and let spice rack rest against the
inside of the door.
Repeat above steps for top spice rack.
top spice
rack
bottom
spice
rack
Fig. 17
14
grease
tray
grease
cup