Outdoor Unit; Installation / Service Tools; Specifications; Installation Parts, Accessories - Toshiba RAS-3M18S3AV-E Manual De Instalación

Outdoor Unit

2

Installation / service tools

Changes in the product and components
In air conditioners using R410A, in order to prevent any other refrigerant from being accidentally charged, the service port diameter size of the outdoor unit
service valve has been changed. (1/2 UNF 20 threads per inch)
• In order to increase the pressure resisting strength of the refrigerant piping, fl are processing diameter and opposing fl are nuts sizes have been changed. (for
copper pipes with nominal dimensions 1/2 and 5/8)
Gauge manifold for R410A
Charge hose for R410A
Vacuum pump for R410A
Gas leakage detector for R410A
3
Specifi cations
Operating conditions
*1
Dimension
Net weight
Refrigerant R410A
Power supply
Maximum running current
Installation fuse rating
Power cord (H07RN-F or 60245IEC66)
Connecting cable (H07RN-F or 60245IEC66)
Pipe length
The specifications for performance of this air conditioner differs depending on the combination of the indoor units which are operated.
The information in this specifications table applies for the combinations with the catalogue.
For operation, read the owner's manual packed with the indoor unit.
Equipment complying with IEC 61000-3-12.
*1 If the air conditioner is used in conditions other than the above, the safety protection functions may be activated.
* Example of indoor unit class: RAS-B10UFV-E1 is abbreviated as "10".
Indoor unit class
Unit C 07 or 10 or 13
Unit B 07 or 10 or 13 or 16
Unit A 07 or 10 or 13 or 16
36 (RAS-3M18S3AV-E)
Total 32 (RAS-2M18S3AV-E)
26 (RAS-2M14S3AV-E)
4

Installation parts, accessories

Installation parts *Locally procured
Parts name
Indoor unit
(abbreviation)
Refrigerant piping
*4
07, 10, 13
Putty, PVC tapes
Accessories
Installation
1
manual
1116691001-1.indb 6 1116691001-1.indb 6
Phillips screwdriver
Level
Scale
Utility knife
Cooling operation
Dry operation
Heating operation
Height
Width
Depth
Minimum for 1 unit
Maximum for 1 unit
Maximum for total unit
Height difference
No additional refrigerant charge
Standard connecting pipe diameter
RAS-3M18S3AV-E RAS-2M18S3AV-E
6.35, 9.52 mm —
6.35, 9.52 mm 6.35, 9.52 mm
*3
6.35, 12.7 mm *2 6.35, 9.52 mm
—
Specifications
Liquid side
Gas side (O.D.)
(O.D.)
6.35 mm 9.52 mm
16 6.35 mm 12.7 mm
—
CD-ROM
Rubber cap
2
(Installation
(Water-proof)
manual)
Pipe cutter
Torque wrench
Wrench (or spanner)
Reamer
RAS-3M18S3AV-E RAS-2M18S3AV-E
–10 to 46 °C
–10 to 46 °C
–20 to 24 °C
630 mm
800 mm
300 mm
46 kg
1.5 kg
1 ph, 50 Hz, 220-240 V 1 ph, 60 Hz, 220 V
13.1 A
20 A breaker or fuse (all types can be used)
3-core 1.5 mm
4-core 1.0 mm
2 m
25 m
50 m
10 m
50 m
All combinations that do not exceed the "Total" number
can be installed.
RAS-2M14S3AV-E
2 or more indoor units must be connected to an outdoor
—
unit.
When 2 indoor units are connected to an outdoor unit,
6.35, 9.52 mm
*3
note that some combinations of indoor units are not
*3 6.35, 9.52 mm
compatible.
For the further details, refer to the catalogue.
*2 Need the reducer (07, 10, 13 class 12.7 to 9.52 mm).
*3 Need the expander (16 class 9.52 to 12.7 mm).
• Locally procured.
Q'ty
*4 Refrigerant piping covered with insulating material (Polyethylene
foam, 6 mm thick) When duct-type or cassette-type unit is to be
1 ea.
installed, it shall be covered with thicker insulating material
(Polyethylene foam, 10 mm thick)
1 ea.
1 F-GAS label
6
Installation Manual
Flare tool for R410A
4 mm hexagonal wrench
RAS-2M14S3AV-E
44 kg
1.32 kg
12.6 A
2
2 or more
20 m
30 m
30 m
1 Drain nipple 1
EN
EN
EN
EN
EN
EN
EN
9/27/16 3:34 PM 9/27/16 3:34 PM