Connecting Plugs And Main Power / Sewing Light Switch - Brother LS2125 Manual De Instrucciones

CSAK AZ EGYESÜLT KIRÁLYSÁGI, EIREI, MÁLTAI, ÉS CIPRUSI FELHASZNÁLÓKNAK.
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY.
If your sewing machine is fitted with a 3 pin non-rewireable BS plug then please read the following.
IMPORTANT
If the available socket outlet is not suitable for the plug supplied
with this equipment, it should be cut off and an appropriate
three pin plug fitted. With alternative plugs an approved fuse
must be fitted in the plug.
NOTE: The plug severed from the main leads must be
destroyed as a plug with bared flexible cords is hazardous if
engaged in a live socket outlet. In the event of replacing the plug
fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the
mark, rating as marked on plug.
ASA
Always replace the fuse cover. Never use plugs with the fuse
cover removed.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
'E', BY THE EARTH SYMBOL
OR YELLOW.

Connecting Plugs and Main Power / Sewing Light Switch

1. Connect the three-prong plug into the machine.
2. Connect the electrical supply plug into a wall outlet.
- When leaving the sewing machine unattended, the main
switch of the machine must be switched off or the plug
must be removed from the socket outlet.
OR COLORED GREEN
The wires in these main leads are colored in accordance with
the following code:
Blue
Brown
As the colours of the wiring in the main lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter 'N' or coloured black or
blue.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter 'L' or coloured red or
brown.
Turn on or off the switch for the main power and sew-light.
1 Turn on
2 Turn off
- When servicing the sewing machine, or when removing
covers or changing lamps, the machine or the electrical set
must be disconnected from the supply by removing the
plug from the socket outlet.
Neutral
Live
1
2