Husqvarna 28508915044 Manual Del Usuario página 11

- Remove nuts with the washers.
- Remove the turn signal.
Preassembly scope of supply
- Position the original turn signal on license plate holder (included).
- Mount and tighten original nuts with the washers.
- Position license plate lighting (included).
- Mount and tighten screws with the washers (all included).
- Position the bracket for refl ector with screws (all included).
- Mount and tighten screw (included).
- Mount refl ector with clamping washers (all included).
- Route all the cables upwards as shown.
- Mount splash protection (included).
Route all the cables free of tension and ensure that the
cables cannot be kinked or pinched!
11