Final Installation - Harbor Breeze BELLEVUE E-BE44ABZ5C Manual Del Usuario

FINAL INSTALLATION

1.
Temporarily lift canopy (B) to mounting bracket (C) to
determine which two canopy mounting screws (O) in
mounting bracket (C) align with slotted holes in
canopy (B) and partially loosen these two canopy
mounting screws (O). Remove the other two canopy
mounting screws (O) and star washers (R). Now, lift
canopy (B) to mounting bracket (C) again, aligning
slotted holes in canopy (B) with loosened canopy
mounting screws (O) in mounting bracket (C). Twist
canopy (B) to lock. Re-insert the canopy mounting
screws (O), along with the star washers (R), that
were previously removed. Tighten all canopy
mounting screws (O) securely. (Fig. 1)
Partially insert three blade screws (AA), along with
2.
three fiber blade washers (BB), to attach one blade
arm (H) to a blade (G). Then, tighten each blade
screw (AA) starting with the one in the middle. (Fig.
2) Repeat with remaining blades (G).
Hardware Used
Blade Screw
AA
Fiber Blade Washer
BB
3.
Locate motor screws (M) and lock washers (N) that
were removed in Step 5 on page 8.
Insert two motor screws (M), along with lock washers
(N), through one blade arm (H) to attach blade arm
(H) to motor housing (D). [Note: Use opening in fitter
plate for easy access to holes in motor.] Tighten
motor screws (M) securely. (Fig. 3) Repeat with
remaining blade arms (H), making sure to completely
secure each blade arm (H) before proceeding with
the next.
1
2
x15
H
x15
3
14
R
B
A
AA
BB
D
N
M
O
G
G
H