Final Installation - Harbor Breeze 40087 Manual De Instrucciones

FINAL INSTALLATION

1. Align the key slots on the canopy (B) with the heads
of the mounting bracket screws (HH) preassembled
on mounting bracket (C). Lift the canopy (B) up and
rotate it clockwise until the mounting bracket screws
(HH) engage the key slots
Hardware Used
Mounting Bracket
HH
Screw
2. Secure the canopy (B) with the previously removed
mounting bracket screws (HH) and tighten all four
mounting bracket screws (HH).

Note: Closemount installation will not use the
downrod (A) and canopy cover (G).
Hardware Used
Mounting Bracket
HH
Screw
3. Align blade arm (H) studs with their corresponding
holes in the blade (I) and then insert the blade screw
(II) and blade washer (JJ) to attach one blade arm (H)
to a blade (I). Tighten the blade screw (II). Repeat for
each blade.
Hardware Used
II
Blade Screw
JJ
Blade Washer
1
x2
2
C
B
x 4
3
x 5
x 5
Lowes.com/harborbreeze
15
C HH
B
HH
II
JJ
I
H
Stud