Confi Guration Parameters - Pixsys ATR 900 Manual Instalador

Press
2
3
4
5
6

10 Confi guration parameters

 
1 Analogue input AN1:
Type of thermocouple
0 Type K (-50/1300 °C)
1 Type J (-50/1200 °C)
2 Type S (-50/1800 °C)
3 Type R (-50/1800 °C)
 
2 Limits of the scale (0/3200 °C or °F):
This parameter defi nes the maximum temperature of the kiln.
Display
Flashing digit changes.
 
Display fl ashing.
Press this key to scroll through
all the parameters.
Increase or decrease the value.
End of confi guration. The
controller is set as STOP-mode.
Do
Enter password
STEP to skip to next number
and then to display the 1
parameter.
When the display reaches the
required parameter, wait for a
few seconds for it to change to
the value.
Enter the new value (see par.
8.1 to change numeric value).
To change a new parameter
return to point 4.

. Press
st
17 GB