Installation: Triango 80 W; Workload Data; Installing The Wall Holder - Derungs Dmed Triango 80 C Instrucciones De Montaje Y Funcionamiento

ENG
4.

INSTALLATION: Triango 80 W

4.1

Workload data

Bending moment M
B
Vertical weight F
G

4.2. Installing the wall holder

►
Fastening hardware does not come with delivery.
DANGER
Assembly by qualified personnel
►
Assembly must be done by qualified personnel only.
Lack of appropriate knowledge may pose a death
hazard.
►
Two people are needed for assembly.
CAUTION
Determine the fasteners to use from the workload data
table
►
Before assembly, make sure the rod dimensions are
correct.
CAUTION
Make sure the wall holder is in the correct position.
►
The wall holder must be aligned according to the axis
in the image.
►
Misalignment will compromise mechanical safety.
►
We recommend using a counterplate on lightweight
construction walls (not included with delivery).
DANGER
Death hazard from electric shock.
►
All poles of the luminaire must be disconnected from
the power supply by an external lockable switch.
►
Draw 6 drill marks.
Observe the position of opening "A" for connecting
►
the current.
30
275 Nm
135 N
A
WARNING
Wear safety equipment according to the tool manufacturer's
instructions.
►
Drill holes and blow out with a bellows.
►
Check the hole distances.
►
Position the wall bracket on the wall and hammer in the
fastening anchor.
Tighten the fastener according to manufacturer's
►
instructions.
DANGER
Death hazard from electric shock.
►
Do not turn on the power supply before the luminaire
head has been installed.
►
This device must only be connected to a power grid
with a protective ground conductor (PE) to prevent risk
of electric shock
►
Connect the power.