Installation: Triango 80 Luminaire Head; Operation - Derungs Dmed Triango 80 C Instrucciones De Montaje Y Funcionamiento

ENG
6. INSTALLATION: Triango 80 luminaire
head
DANGER
Death hazard from electric shock.
►
Before any work on the device, disconnect the current
supply or pull the plug out of the socket and secure
the device against being turned back on.
WARNING
Injury hazard
►
The spring balanced arm is under high spring stress.
If the boom is lowered without the installed device, it
MUST be held firmly.
►
If it is let go, it springs upward and can cause severe
injury.
►
Never remove the luminaire body unless the boom is
in the upper position or is held securely in low position
by a second person.
►
To prevent severe injury or damage, always get the
help of a second person when installing and removing
the luminaire body.
Remove screw "A" and pull off the yellow protection cap
►
"B" from the spring arm safety device.
►
Attach the luminaire head.
►
Turn the sleeve to insert the locking device.
34
A
B
►
Turn the sleeve back the other way and secure with a
screw.
WARNING
Injury hazard from falling luminaire head.
►
Make sure the locking device is properly installed.
►
Damage to due to a poorly mounted luminaire head.
Tighten the screw as the luminaire head's friction
►
requires.
►
Attach the hand grip.
7.

OPERATION

Triango 80 C, W, F
CAUTION

This product emits potentially hazardous optical
radiation. Do not stare directly into the light cone. Eye
irritation may occur.

The radiation emitted by this product complies with the
exposure limits for reducing the risk of photobiological
hazards based on IEC 62471: RG 2 (medium risk).
►
Turn the luminaire on with the rotary knob.
►
The luminaire can be dimmed by turning the head.
►
Before each use, perform a functional test: All LEDs in
the light cone must come on.
CAUTION
►
The rotary knob is not removable.