Installing The Wall Mounting Arm - Derungs Dmed Triango 80 C Instrucciones De Montaje Y Funcionamiento

D
Insert wall bracket "A" (with end ring "C" and cover "B" in
►
position) into the wall holder "D" and simultaneously pull
the plug through the rectangular cutout.
E
F
►
When the wall bracket is vertically aligned, install it with
the M8 locking screw and nut "E" and tighten (20 Nm).
Tighten all 4 grub screws "F" (5 Nm).
►
►
Connect the ceiling tube plug with the power supply plug.
►
Push the cover against the wall and screw tight with the
ring (0.5 Nm)
C
B
A
4.3

Installing the wall mounting arm

WARNING
►
Injury hazard from spring balanced arm jumping
►
Do not remove the transport safeguard until after the
luminaire head has been installed.
B
A
C
Carefully loosen the cover "A".
►
Loosen the screws "C" and remove the joint covers "B".
►
D
Carefully remove the rotary plug "D".
►
►
Install the wall mounting arm.
ENG
A
31