中文
AE5602T
EN
DE
RU
KO
PT
JA
ES
Chapter IV
Four Safety Information
3D four wheel aligner must be operated by professional and skillful auto technician. Safety information mainly
remind operator must not imperil self and others safety in work place.
Due to big difference of skills,technique, tools and parts in auto repair and maintenance, Manufacturer can not
anticipate all condition and provide the suggestion or safety information accordingly. The technician, who operates
the equipment, must pay attention to the safety information and adopt right way to complete the four wheel
alignment.
Before operation,operator must completely know the repaired vehicle system , operation and safety feature of lift,
and related tools to complete the alignment.
When using aligner or other equipments, you have to obey the safety regulation as follows:
1.Read all safety information carefully.
2.Don't touch heated metal parts to avoid burn.
3.when power cable is broken, Don't operate the equipment before repair byprofessionals.
4.Don't hang cable on table or workbench. Avoid cable touching heated manifolding pipeor moving fan blade.
5.Adopt cable or socket with rated current or more than rated current. If rated current ofcable is lower than the
one of equipment, it may cause overheat or burning.
6.Be sure to take power plug off when equipment is not used. Take plug off, Don't take plugoff by mean of pulling
cable. Reel the cable on the equipment loosely in storage.
7.Power source require to be AC220V, 50 HZ, power socket with Three terminals 10A is required.
8.Measuring camera, target plate and clamps are all precision parts, please handle gentlyin operation.
9.To keep best security and performance of computer system of aligner, please don't installother software
optionally.
84