Ryobi RLT430CES Manual De Utilización página 19

EN
FR DE ES
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the product
to your nearest AUTHORISED SERVICE CENTER for
repair. When servicing, use only identical replacement
parts.
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
If you do not understand the warnings and
instructions in the operator's manual, do not
use this product. Call Ryobi customer service for
assistance.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes,
which can result in severe eye damage. Before
beginning power tool operation, always wear
safety goggles or safety glasses with side
shields and, when needed, a full face shield. We
recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is
marked to comply with EN 166.
SAVE THESE INSTRUCTIONS
INTRODUCTION
This product has many features for making its use
more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design
of this product making it easy to maintain and operate.
DESCRIPTION OF FIGURES
Fig 1
1. Primer bulb
2. Choke lever
3. Fuel cap
4. Rear handle
5. Throttle trigger
6. Starter grip and rope
7. Trigger lock
8. On/Off switch
9. Strap hanger
10. Foam tube
11.Front handle
12. Coupler
13. Knob
IT PT NL SV DA
English (original instructions)
NO FI HU CS RU
14. Grass deflector
15. Drive shaft housing
16. Reel Easy™ line trimmer head
17. Pro cut II™ line trimmer head
Fig 2
18. Button
19. Guide recess
20. Power head shaft
21. Positioning hole
22. Trimmer attachment
Fig 3
23. Hanger cap
24. Hole in hanger cap
25. Hole on attachment
Fig 4
26.Clamp Assistant
27. Barrier
28. Bolt
Fig 5
29. Cut-off blade
Fig.17
30. Oil cap/ dipstick
31. Hatched area
32. Oil fill hole
33. Funnel
Fig.14
34. Start position
35. Run position
Fig.19
36. Cover
37. Latches
38. Bump/ feed knob
39. Hex bolt
40. Spool
41. Spring
42. Line trimmer head
43. Latch opening
Fig.8
44. Hex-shaped opening
45. Align line on knob with arrows
46. Eyelet
Fig.20
47. Drive shaft
48. Spool retainer
16
RO PL SL HR ET LT LV SK BG