Safety Warnings - Trix 38 Serie Manual De Instrucciones

Function
This locomotive has the following equipment
and features :
This model is designed for operation with H0 2-rail
G
DC systems (track according to NEM standards)
with conventional DC power packs (12 volts).
G This locomotive is equipped with an electrical
interface connection for digital operation
(NEM Standard 652) and can be retrofitted with
the 66833 Selectrix locomotive decoder.
G Headlights change over with the direction of travel.
G Locomotive can be retrofitted with a smoke
generator.
The necessary maintenance that will comes due
with normal operation is described below.
Please see your authorized Trix dealer for repairs or
spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Trix have been installed in Trix products
or where Trix products have been converted in such
a way that the non-Trix parts or the conversion were
causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of
proof thereof, that the installation of non-Trix parts or
the conversion in or of Trix products was not causal
to the defects and / or damage arising, is borne by
the person and/or company responsible for the
installation and / or conversion, or by the customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it.
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.
5