Warranty - Brill 270 RT Tipp Manual Del Usuario

Keep your fingers and feet away
from the cutting tool!
Each time you have to work on
GB
the machine or leave it or top it
up, always switch off the motor.
If you strike an obstacle when
working, please disable the
machine. Unplug from the mains.
Remove the obstacle, check the
equipment for any damage and
have it repaired if necessary.
If the equipment begins to
vibrate strongly, unplug from the
mains and ascertain the cause.

Warranty

The manufacturer warrants its
products for exclusively non-
commercial use for a period of
24 months from the date of orig-
inal purchase. This warranty
does not affect statutory warran-
ty claims. The warranty covers
all substantial faults of the prod-
uct, which are caused by defects
in material and workmanship. If
a product exhibits such a defect
we will, at our option, repair or
replace it without cost for parts
and labour provided the follow-
ing requirements are fulfilled:
The product must have
.
been sold to the customer
in a legally correct way.
The original receipt with the
.
customer's address, date of
purchase, model and product
designation is presented as
proof of purchase. The product
must have been purchased
within the EC.
The product was handled
.
properly and according to the
recommendations in the oper-
24
Taking
A
a Break
Never leave the equipment
unattended. If you stop work,
unplug the equipment from the
mains and store the equipment
in a safe place.
If you stop work to go to a
different work area, it is essenti-
al to turn the equipment off and
unplug from the mains.
Beware of Environmental
A
Influences
Never use the equipment in the
rain or in damp, wet conditions.
ating instructions. It is essential
that the product has been
maintained and cleaned
according to the information
in the operating instructions.
No attempt to disassemble or
repair the product has been
made by either the buyer or
an unauthorised third party.
It must be ensured that only
.
original replacement parts and
original accessories approved
by the manufacturer are used.
There may be an increased
risk of consequential damage
and accidents if non-original
parts or non-original acces-
sories are used. This warranty
does not cover consequential
damages.
The product must be either
.
taken directly or sent with
postage paid to an authorised
service centre. The original
receipt must be sent with the
product.
The warranty does not cover
.
damage from misuse, abuse,
Never work immediately
adjacent to a swimming pool
or garden pond with electrical
equipment.
Comply with local quiet periods
in your community!
Electrical
A
safety
Check the power cable regularly
for damage and signs of wear.
Only use permitted extension
cables.
Unplug the mains plug immedia-
tely if the mains cable / extension
cable is damaged or severed.
use of unsuitable, non-original
or unauthorised interchange-
able parts, replacement parts
or accessories, as well as
improper maintenance and
cleaning.
The products contain various
components that are subject to
normal or use-related wear.
The warranty does not extend
to these wearing parts.
In particular the following com-
ponents relating to this product
are excluded:
Blades / blade bar / drive belt /
care roller / blade roller /
lower blade / cutting plate /
cutting line / cutting head
cover / saw blade /
nickel / cadmium-cell (battery).
The manufacturer warranty
does not affect existing warranty
claims between the customer
and the dealer / seller.