Moonah Fan Installation Instructions
OPERATING THE REMOTE:
Before you start using the remote, take the time to read through this section and get
familiar with the buttons and function of each button.
LED Indicator
The red LED indicator on the top of the transmitter will flash when the buttons are active.
BUTTONS ON THE REMOTE
HI: Press the button to set fan running at High speed.
MED: Press the button to set fan running at Medium speed.
LOW: Press the button to set fan running at Low speed.
OFF: Press the button to turn OFF the fan.
LIGHT CONTROL BUTTON:
Press the button to turn the light ON/OFF.
The remote has memory function. If the fan or light is turned off by the isolating switch, it will memorise and
recover the last status when turned on next.
-
WARNING – Keep new and used batteries away from children.
-
CAUTION – Do not ingest battery—Chemical burn hazard.
-
Always use 2 x AAA 1.5V battery type with this ceiling fan remote controller.
-
Ensure the batteries are inserted with the correct polarity.
-
To prevent false operation during battery insertion or replacement, this ceiling fan must be disconnected
from the supply mains.
-
Remove batteries from the product when not in use for long periods of time.
-
Batteries must be removed from the remote transmitter before it is discarded.
-
Dispose of exhausted batteries immediately and safely (so they cannot be retrieved by children).
Flat batteries can still be dangerous. Contact your local council to safely dispose of the battery.
-
Regularly check the product and make sure the battery box lid is correctly secured. If the battery
compartment does not close securely, stop using the product and keep it away from children.
-
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate
medical attention for expert advice.
-
Battery Leaks: Battery contains chemicals and should be treated as any chemical would. Take
precautions when handling leaked battery chemicals. Battery chemicals should not be placed near the
eyes or ingested.
9 | P a g e
SAFETY PRECAUTIONS FOR BATTERY
Fig. 14
DK66-52-L-***-01