Hanging The Fan; Electrical Wiring Diagram - LUCCI Air VICEROY Manual De Instrucciones

Viceroy Installation Instructions
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F) provided
with the outlet box and washers (E) provided with fan. Fig. 6
Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is positioned
on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.7
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
Fig. 8
4 | P a g e

HANGING THE FAN

ELECTRICAL WIRING DIAGRAM

1. Connect the household live supply wire (black) to
EMI filter input wire (black, AC IN L) as shown in Fig. 8.
2. Connect the household neutral supply wire (white) to
the EMI filter input wire (white, AC IN N).
3. Connect the household ground wire to the fan
bracket ground wire (green), EMI filter ground wire and
fan body ground wire.
4. Connect the receiver output wire (yellow, TO
MOTOR U) to motor input wire (yellow, TO MOTOR U).
5. Connect the receiver output wire (grey, TO MOTOR
V) to motor input wire (grey, TO MOTOR V).
6. Connect the receiver output wire (red, TO MOTOR
W) to motor input wire (red, TO MOTOR W).
7. Connect the receiver output ground wire to fan body
ground wire.
8. After connecting the wires, spread them apart so that
the green and white wires are on one side of the outlet
box and the black and blue wires are on the other side.
9. Turn the connecting nuts upward and push the wiring
into the outlet box.
Fig. 7
nuts supplied