Hanging The Fan; Electrical Wiring Diagram - LUCCI Air AIRFUSION Manual De Instrucciones

Type A Installation Instructions
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F) provided
with the outlet box and washers (E) provided with fan. Fig. 6
Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is positioned
on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.7
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
EMI
Fig. 8
4 | P a g e

HANGING THE FAN

ELECTRICAL WIRING DIAGRAM

1. Connect the household live supply wire (black) to EMI filter
input wire (black, AC IN L) as shown in Fig. 8.
2. Connect the household neutral supply wire (white) to the EMI
filter input wire (white, AC IN N).
3. Connect the household ground wire to the fan bracket ground
wire (green) and EMI filter ground wire.
4. Connect the EMI filter output wire (black, TO MOTOR L) to
motor live input wire (black, TO MOTOR L).
5. Connect the EMI filter output wire (white, TO MOTOR N) to
motor neutral input wire (white, TO MOTOR N).
6. Connect the EMI output ground wire to fan body ground wire.
7. After connecting the wires, spread them apart so that the
green and white wires are on one side of the outlet box and the
black and blue wires are on the other side.
8. Turn the connecting nuts upward and push the wiring into the
outlet box.
Fig. 7
nuts supplied