Operating The Remote - LUCCI Air AIRFUSION GIRONA Manual De Instrucciones

Airfusion Penta Installation Instructions
Fig. 8 Remote battery compartment Fig. 9 Receiver DIP switch

OPERATING THE REMOTE:

Before you start using the remote, take the time to read through this section and get familiar with the
buttons and function of each button.
LED Indicator
The red LED indicator on the top of the transmitter will flash when
the buttons are active.
BUTTONS ON THE REMOTE
HI: Press the button to set fan running at High speed.
MED: Press the button to set fan running at Medium speed.
LOW: Press the button to set fan running at Low speed.
OFF: Press the button to turn OFF the fan.
: Press the button to turn ON/ OFF the light.
The remote has memory function. If the fan or light is turned off by
Fig. 10
the isolating switch, it will memorise and recover the last status
when turned on next.
REVERSING SWITCH
Your ceiling fan can operate in either summer or winter mode.
SUMMER Mode: The reverse switch shall be in the "down" (SUMMER) position to make the fan rotate in
an anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
9 | P a g e V e r 1 . 0