SATA 53121 Manual Del Uso página 10

20mm 500W Dual Function Light Duty Hammer:
Safety instruction:
General Electric Tools Safety Warning
Notic:
Read all the warnings and instructions. Disobey the following warning and instructions will cause electric shock, fire or serious
injury. Keep all warnings and instructions for reference
Keep all warnings and instructions for reference
In all of the following warnings, the term"power tool" means a mains powered（wired）power tool or a battery powered（wireless）
power tool.
1 ） Workplace Safety:
a）Keep the work site clean and bright.
b）Do not operate electric tools under the explosive environment, such as flammable liquids, gases or dust. Electrical tool' s spark
ignites gas or dust.
c）Keep children and spectators away then operate electric tools. Lack of attention would cause losing control of the tool.
2 ） Electrical safety:
a）The electric tool plug must be matched with the socket. Never to modify the plug.
Electric tools that need to be grounded can not be switched. Unmodified plugs and matching sockets will reduce the risk of
electric shock.
b） Avoid touching the ground surface, such as pipes, heat sinks and fridge and so on.
If your body touch the ground, you will increase the risk of electric shock.
c） Electric tools can not be exposed to rain or wet environment. Water entering electric tools will increase the danger of electric
shock.
d）No wires should be abused. Never use electric wires to carry and pull electric power tool or a plug is pulled out. Keep the wire
away from the heat, oil, and sharpness side or moving part. Damaged or twining cords will increase the danger of electric shock.
e） When power tools are used outdoor, apply suitable outdoor external floppy line. Cords suitable for outdoor use will reduce the
risk of electric shock.
f ） If it is unavoidable to operate electric tools in wet environment,The residual current action protector（RCD）
should be used. RCD can reduce the danger of electric shock.
Note:
The term "residual current operated protector（RCD）" is available to use " Ground fault circuit interrupter（GFCI）" and
*Ground leakage circuit breaker（ELCB）" term replaced
3） Personal Safety:
a）Be vigilant when operating electric tools, pay attention to what you do and keep awake. When you feel tired or have a drug, do
not operate electric tools when alcohol is reacting. Instant carelessness in the operation of electric tools can cause serious
personal injury.
b） Apply the personal protective equipment. Always wear protective goggles and other safety.protection equipment, such as proper
use of dust mask and anti slip safety.shoes, helmet and hearing protection devices can reduce personal injury.
c） Prevent accidental starting. Make sure that the switch is connected to the power supply and / or battery boxes, pick up or carry
tools are in a closed position.If put your finger on the switch with the power supply which can lead to dander.
d） Remove all adjusting keys or wrenching before electric tools power on.It can cause personal injury if wrench or key left on
electric tool rotary parts.
10
53121/05153
中文
EN DE RU KO PT JA ES