Operating the robot
Cleaning
Attaching the cleaning pads
NOTE: If the microfibre cleaning pads are too damp, the robot may not work
correctly. Wring them out well before attaching them to the underside of the robot.
Preparing the water tanks
NOTES:
•
Each water tank has a maximum capacity of 60ml.
•
For optimum cleaning, check the dilution ratio indicated on the detergent bottle.
•
Only use floor cleaner.
Dampen the thick microfibre
cleaning pads with clean water,
then wring them out. Attach
them to the water tanks using the
Velcros. Make sure the cleaning
pads are correctly positioned in
the centre of the water tanks.
Open the water tanks' refill
nozzle in the direction of the
arrow on the cap. Carefully pour
clean water with floor cleaner
into the tanks. Close the tanks.
7
EN