Electric Connections Table - V2 GOLD400D Manual Del Usuario

Opening control for the connection of control
1
devices with N.O. contact
Opening controls for pedestrian access for the
2
connection of control devices with N.O. contact
3 Stop command. N.C. contact
4 Common (-)
5 Photocells type 1. N.C. contact
6 Photocells type 2. N.C. contact
7 Safety ribbons type 1 (fixed). N.C. contact
8 Safety ribbons type 2 (mobile). N.C. contact
9 Common (-)
Power output 24 VAC for photocells and other
10 - 11
accessories
11 - 12 Photocell TX power supply for functional test
Flashing light
13 - 14
230VAC 40W (Pd8) / 120VAC 40W (Pd8-120V)
15 - 16 -
Motor
17

ELECTRIC CONNECTIONS TABLE

48
18 Neutral 230 VAC / 120VAC
19 Power phase 230 VAC / 120VAC
20 Antenna
21 Antenna shield
22 - 23 -
Limit sensor
24 - 25
26 - 27 Capacitor
F1 5A (Pd8) / 8A (Pd8-120V)
MAINS It shows that the control unit is power supplied
It shows that there is an overload on accessories
OVERLOAD
power supply
FCC It shows the opening end of stroke activation
FCA It shows the closing end of stroke activation
OPEN Opening in progress
PAUSE Pause (gate opened)
CLOSE Closing in progress