CAMPAGNOLO ZONDA Manual Del Usuario página 27

• Wet the tyre bead and rim profile with soap and water
(Fig. 11) using a brush.
• Inflate the tyre to the working pressure shown on the tyre
until the two beads engage with the rim (Fig. 12).
Deflate the tyre almost completely (Fig. 13) and inspect
the tyre by pressing lightly with your fingers along the
entire circumference to make sure the bead is perfectly
inserted.
If the tyre is not properly mounted the bead will come out
of its housing on the rim.
• Inflate the tyre to the pressure marked on the tyre wall.
Make sure the tyre shows a regular shape all along its
circumference.
• Close the lock ring with your fingers (C - Fig. 14).
• Screw back the valve ring (C - Fig. 14)
• Put back the valve cap (B - Fig. 14).
8
11
13
12
C
B
14