Assembly Of Harmony Breast Pump - Medela Symphony Instrucciones De Uso

8. Assembly of Harmony
Parts Needed:
• Handle, Diaphragm,
Stem, O-Ring Assembly
• Conector/Pump Body
• White membrane
• Yellow valve
• Breastmilk bottle
and lid
• Breastshield
Note
• Inspect valves for cracks or
chips and inspect membranes
for holes, tears or warping.
If you notice any damage
to these parts, replace them
immediately.
• Check stem to make sure
O-Ring is present.
Note
• Carry out all the steps with
care and assemble the pump
kit correctly for optimum
performance.
24
Breast Pump
®
1
Wash hands before touching
breastpump, kit and breasts
and avoid touching the inside of
containers or lids.
4
Screw bottle onto pump body.
7
Place silicone diaphragm/stem into pump
handle and press down firmly around entire
edge to ensure proper seal. The lines on the
diaphragm should line up with the yellow dots
on the handle.