Bluetooth Interface; Commissioning; Venting; Operating The Pump - Wilo Stratos MAXO-D Instrucciones De Instalación Y Funcionamiento

Dismantling
➜ Fig. 21
▪ Only use suitable tools to dismantle the Wilo-Connector!
9.12

Bluetooth interface

The pump has a Bluetooth interface for connecting to mobile de-
vices. The pump can be operated and adjusted and pump data can
be read out using the Wilo-Smart Connect app and a smartphone.
Bluetooth has activated at the factory and can, if necessary, be de-
activated using the Settings/Device settings menu.
▪ Frequency range: 2400 MHz – 2483.5 MHz
▪ Maximum transmission power emitted: < 10 dBm (EIRP)
10

Commissioning

10.1

Venting

1. Fill the system/equipment properly and vent it.
When venting the rotor chamber, activate the venting function in
the pump menu if required.
10.2

Operating the pump

Description of operating elements
➜ Fig. 3 and 4
Ite Designation Explanation
m
Graphic dis- Provides information about settings and
play the pump status.
3.1
Self-explanatory user interface for adjust-
ing the pump.
Installation and operating instructions Wilo-Stratos MAXO /-D/-Z
Ite Designation Explanation
m
Green LED in- LED illuminates, pump supplied with volt-
dicator age.
3.2
There are no warnings or errors.
Blue LED indi- Pump is being affected externally via an in-
cator terface, for example by:
• Bluetooth remote control
• Setpoint specification via analog input AI1
3.3 or AI2
• Interference from building automation via
control input DI 1 / DI 2 or bus communica-
tion
• Flashes if twin-head pump connected.
Operating Menu navigation and editing by turning and
3.4
button pushing.
Back key Navigates in menu:
• back to previous menu level (press briefly
1x).
• back to previous setting (press briefly 1x).
3.5
• back to main menu (press longer 1x,
> 1 s).
Switches on or off in combination with the
context key lock > 5 s.
Context key Opens context menu with additional op-
3.6
tions and functions.
en-US
19