SPALDING 1-800 Manual Del Propietário página 11

6.
Hook spring (30) into hole of clevis pin (17). Stretch spring (30)
into position with a needle-nose pliers.
7.
Attach rim to board as shown.
WARNING!
TWO cApAblE ADulTs
REQuIRED fOR ThIs
pROcEDuRE. fAIluRE TO
fOllOW ThIs WARNING
cOulD REsulT IN
sERIOus INjuRy AND/OR
pROpERTy DAmAGE.
DO NOT use washers here on
spring return style rims.
Refer to instructions included with
rim hardware for rim assembly.
NOTE:
11
WARNING!
usE EyE pROTEcTION
WhEN INsTAllING
spRINGs.
17
30
Included with
Rim Hardware
Included with
Rim Hardware