Descargar Imprimir esta página

Front View - SPALDING 1-800 Manual Del Propietário

Ocultar thumbs Ver también para 1-800:

Publicidad

1.
Assemble mounting brackets (31) to 3-1/2" (8.9 cm) pole as shown. Position
bracket assembly to approx. 106-3/4" (2.71 m) above level playing surface and
approximately 6-5/8" apart. Tighten nuts (11) and washers (9) onto u-
b.
bolts (14) completely.
NOTE:
Equal rotations of nuts on
each side of u-bolt (14) are
necessary.
9
11
2.
Mount assembled elevator components to mounting brackets (31)
as shown. (Refer to Section A for elevator assembly).
b.
ImpORTANT!
WARNING!
usE cAuTION; ElEVATOR AssEmbly Is
hEAVy.
TWO cApAblE ADulTs REQuIRED fOR
ThIs pROcEDuRE. fAIluRE TO fOllOW
ThIs WARNING cOulD REsulT IN sERIOus
INjuRy AND/OR pROpERTy DAmAGE.
POLE MOUNTING
32
31
Tighten nut (8)
until flush with
end of bolt (6).
14
106-3/4"
(2.71 m)
28
8
33
22
fRONT VIEW
8
31
31
6
6
6

Publicidad

loading