MBM WGE74 Manual De Uso E Instalación página 28

Drainage of the appliance must
be conveyed into the grey wa-
ter discharge network in an
open "glass" unsiphoned formation.
The appliance must only be
used for the purposes indicat-
ed. Any other use must be
considered "IMPROPER" and there-
fore the manufacturer declines all li-
ability for any consequent damage
to persons or property.
Particular safety prescriptions
(obligation-prohibitions-dan-
ger) are detailed in the specific
chapter concerning these is-
sues.
Do not obstruct the heat ex-
traction
openings.
Do not leave flammable objects
or material near the appliance.
upstream the appliance whenever
you need to work in safe conditions.
Whenever it is necessary to
operate inside the appliance
(connections, commissioning,
checking operations, etc.) prepare
for the necessary operations (re-
moval of panels, elimination of elec-
tric-gas-power supply) in compli-
ance with the safety conditions.
DUTIES AND
TIONS REQUIRED OF OPERA-
TORS
Prohibition for the homogene-
ous operator to perform any
type of operation (mainte-
nance and/or other) without having
first read the entire documentation.
The information con-
tained in this docu-
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
and/or dissipation
Disconnect
supplies (water -
gas - electrical)
QUALIFICA-
ment is for the use of the qualified
technical operator who is author-
ised for: handling, installation and
maintenance of the appliance in
question.
neric" operator (Operator with limi-
ted responsibilities and tasks). Per-
son authorised and employed to
operate the appliance with guards
active and capable of performing
routine maintenance (cleaning the
appliance).
The operators who use the
appliance must be trained in
all aspects concerning its
functioning and safety features.
They must therefore interact using
appropriate methods and instru-
ments, complying with required
safety standards.
all
The "Generic" operator must
operate on the appliance after
the technician has completed in-
stallation (transportation, fixing electri-
cal, water, gas and drain connections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of inter-
vention and the relevant work zo-
nes, the following classification is
provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in
which the presence of an exposed
person constitutes a risk in terms of
the health and safety of such a per-
son;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when oper-
ating in such a way as to avoid
- 6 -
The operating
structions have been
drawn up for the "Ge-
in-