Periodic Checks; Information About Scrapping; Information Relative To Scrapping; Environmental Information - Mondolfo Ferro AS 924 Manual De Uso

To keep the machine in optimum safety and operating conditions, the employer is
required to ensure the following period checks are carried out by the authorised
service network.

Periodic checks

a. periodic check of the inflation pressure gauge every 2 years
b. periodic check of the inflation pressure limiting valve every 2 years
c. periodic check of the compressed air supply regulating filter at the machine inlet every
2 years
d. periodic check of all machine controls every 2 years
e. periodic check of the maximum pressure safety valve fitted on the tanks every 2 years
f. check of some parts of the machine, such as: protective and safety devices, parts
subject to wear, parts subject to pressurised fluid (tanks, connections, pipes, etc.),
electrical connections, etc.

11. INFORMATION ABOUT SCRAPPING

If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts.
Dispose of them separately, as provided for by local regulations in force.

12. ENVIRONMENTAL INFORMATION

The disposal procedure described below only applies to machines with the symbol of
the waste bin with a bar across it
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources.
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual municipal
waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds the user
that the product must be disposed of properly at the end of its life.
This prevents the inappropriate disposal of the substances which this product contains,
or the improper use of some of them, from having hazardous consequences for the en-
AS 924 - AS 924 A Operator's Manual
CAUTION
on their data plates.
UK
119