Air Pressure - Mondolfo Ferro AS 924 Manual De Uso

Model Motor rating
400Volt/3ph 50Hz DV
200/230Volt/3ph 50Hz DV
200/230Volt/3ph 60Hz DV
400Volt/3ph 50Hz
AS 924 A
200/230Volt/3ph 60Hz
AS 924
200/230Volt/3ph 50Hz
A TI
200/230Volt/1ph 50Hz
AS 924
200/230Volt/1ph 60Hz
AS 924 TI
115Volt/1ph 60Hz
200/230Volt/1ph 50/60Hz DV
115Volt/1ph 60Hz DV
AIR MOTOR
The noise levels indicated correspond to emission levels and do not necessarily represent
safe operating levels. Although there is a relationship between emission levels and ex-
posure levels, this cannot be used reliably to establish whether or not further precautions
are necessary. The factors which determine the level of exposure to which the operator
is subject to include the duration of the exposure, the characteristics of the workplace,
other sources of noise, etc. The permitted exposure levels may also vary according to the
country. However, this information will enable machine users to make a more accurate
assessment of hazards and risks.
1.2.e. AIR PRESSURE
The machine is equipped with an internal pressure limiting valve to minimize the risk
of over inflating the tyre.
1. Never exceed these pressure limitations:
• The supply circuit pressure (from the compressor) is 220 psi (16 bar).
• The operating pressure (indicated on the regulator) is 150 psi (10 bar).
• The tyre inflation pressure (displayed on the pressure gauge) must never exceed the pres-
sure indicated by the manufacturer on the sidewall of the tyre itself.
2. Activate the air inflation jets only when inserting the bead.
3. Discharge the air pressure system fully before disconnecting the power supply or other
pneumatic components. The air is stored in a tank for operating the inflation jets.
4. Activate the air inflation jets only if the rim is correctly clamped on the tyre changer (if
required) and the tyre is completely mounted.
AS 924 - AS 924 A Operator's Manual
Rotation
kW
speed rpm
0,9 - 1,5 6-12
0,9 - 1,5 6-12
0,9 - 1,5 6-12
0.75 8.5
0.75 8.5
0.75 8.5
0.75 8.5
0.75 8.5
0.75 8.5
0.75 6-15
0.75 6-15
/ 6.5
Torque Weight of electric/
Nm electronic part kg
900 11.5
1200 11.5
1200 11.5
900 11.5
1200 11.5
1200 11.5
800 11.5
800 11.5
800 11.5
1200 10.2
1200 10.2
800 /
UK
85