Allview M10 Jump Manual De Usuario página 8

Charge the battery
1. Before charging the battery, please make sure that the battery is installed properly in the phone.
2. Connect the charger to the phone socket, and then connect the charger to the AC socket.
3. If the phone is off when it's charging, the charging indicator is displayed on the screen. If the
phone is on when it's charging, user can use it while charging. When the battery is fully charged,
the charging indicator on the screen is full and stops twinkling. While using the handset for the first
time, please completely discharge and then completely charge the battery. Repeat the process for
three times to achieve the full performance of the battery.
4. Long period unused or some other reasons may cause low battery pressure, so at the beginning
of charging the screen is black and it may take a while before the charging indicator appears.
Warning: When charging, in order to avoid serious damage to phone circuitry, do not remove or
dispose the battery.
CALLS
Key Explanation
* Key # Key:
Functions vary in different situations or function menus:
8 EN