Technical Characteristics; Installation And Pre Operation; Installation; Electric Installation - Skymsen FCZ-N Manual De Instrucciones

1.3 Technical Characteristics

Minimum electric wire gauge

2. Installation and Pre Operation

2.1 Installation

2.1.1 Placing
The equipment shall be installed upon a dry, levelled and stable surface.

2.1.2 Electric Installation

This equipment has been designed to be used on 220 V single phase network. When
receiving the equipment check the voltage given on the cord label;
The cord has no plug and features three wires, ground wire is green and yellow.
Connection to the electric network has to be made at the installation local by a qualified
technician, giving special attention to the ground connection.
It is recommended to connect the cord to the network by means of a plug and a socket to
allow to unplug the equipment when cleaning or maintenance are performed.
Make sure the electric network voltage is 220 V the same voltage indicated on the

2.2 Pre Operation

Before to start operation all the parts to be in contact with the product shall be washed
6
CHARACTERISTICS
Maximum Load
Voltage
Frequency
Power rating
Height
Width
Depth
Net Weight
Gross Weight
Heating Time
Oil Quantity
TABLE 01
UNIT
kg
mm²
V
Hz
W
mm
mm
mm
kg
kg
min
L
IMPORTANT
cord label.
FCZ-N
2
4 ou 10 AWG
220
50/60
5000
1210
500
770
14,8
18
20
18