Operation; Starting - Skymsen FCZ-N Manual De Instrucciones

with water and neutral soap (see item 3.4 cleaning).
Make sure the equipment is stable on its working place.
Before to put inside the tank the water , the salt and the oil make sure the valve #
09 (Pic.01) is closed to avoid the water to flow trough it.

3. Operation

3.1 Starting

Before to Switch ON the machine, load the Tank # 02 (Pic.01) with COMESTIBLE OIL up to
the Oil level mark # 10 (Pic.01), the full tank oil load is reached with 18 oil litres.
To start the equipment turn clockwise the Temperature Thermostat knob # 07 (Pic.01), the
Pilot Lamp # 08 (Pic.01) will light. Turn the knob up to the desired temperature. To switch
OFF the equipment return the Temperature Thermostat to position zero
The resistance # 06 (Pic.01) will remain switched ON while the Pilot Lamp # 08 (Pic.01) is
lighted, the light turns OFF when the desired temperature is reached.
IMPORTANT
PICTURE 02
Cleaning Valve
Oil Tank Maximum
Level (18 liters)
Resistance
7