en
|
18
| Mastertech II VCI
7.
Cleaning and Mainte-
nance
The housing of the Mastertech II VCI may
only be cleaned with soft cloth and a neu-
tral cleaning agent. Do not use abrasive
cleaning agents or coarse cloth.
i
The Mastertech II VCI does not contain
any user-serviceable parts. Do not open
the Mastertech II VCI; opening voids the
warranty.
¶
Do not immerse the Mastertech II VCI or any
of its parts or accessories in water.
¶
Even though the Mastertech II VCI and the
accessories are water-resistant, they are not
waterproof. Allow to dry thoroughly before
storing.
¶
Avoid using harsh solvents such as petroleum
based cleaning agents, acetone, benzene,
trichloroethylene, etc.
7.1
Restoring the system soft-
ware on the Mastertech II VCI
(Recovery)
As a result of a power failure or a communi-
cations error during a software update, the
Mastertech II VCI software may become cor-
rupted. In this case, it is necessary to execute
a recovery:
1. Connect the Mastertech II VCI to your com-
puter using the USB connecting cable.
2. Launch the VCI Manager software.
3. Select Mastertech II VCI in "VCI Explor-
er".
4. To start the recovery, press and hold the
power button on the Mastertech II VCI for
at least 5 seconds.
The Mastertech II VCI icon in the VCI Man-
ager is identified by "Recovery".
5. Select the Mastertech II VCI in the VCI
Manager.
6. Select <Recover>.
1699200881 | 2020.03.02
7.2
Spare parts and accessories
Kit Component
VCI system tester
Diagnostic cable
USB connecting cable A to B, 3 m F00K.108.653
WLAN USB stick
Bosch Automotive Service Solutions, Inc.
Part number
1 699 200 338
1 699 200 366
1 687 010 590