Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
en
|
4
| Mastertech II VCI
2.
User instructions
Before commissioning, connecting, and
operating this product, it is absolutely es-
sential that the operating instructions/own-
er's manual and, in particular, the safety
instructions are studied carefully. Studying
these documents will allow you to elimi-
nate any uncertainties about this product
and any associated safety risks, which is
in the interests of your own safety and will
ultimately help avoid damage to the device.
When this product is transferred to another
user, not only the operating instructions but
also the safety instructions and information
on its designated use must be transferred
to the new user.
2.1
Intended users
The product may be used by skilled and
instructed personnel only. Personnel sched-
uled to be trained, familiarized, instructed,
or take part in a general training course
may only work with the product under the
supervision of an experienced user.
All work on electrical devices must be
carried out by individuals with sufficient
knowledge and experience in the fields of
electrical and hydraulic equipment.
2.2
FCC Compliance (USA)
Mastertech II VCI complies with the re-
quirements of Section 15 of the FCC Rules.
The following conditions apply regarding
operation:
•
Mastertech II VCI must not cause any
harmful interference;
•
Mastertech II VCI must permit reception
of interference, including interference
that can cause unwanted operation.
The Mastertech II VCI was tested and
complies with the limits for a Class A
digital device as defined in Part 15 of the
1699200881 | 2020.03.02
FCC regulations. These limits are designed
to provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
Mastertech II VCI may generate, use, and
emit energy at radio frequencies that can
disrupt radio communication if installed
improperly or used in a manner inconsistent
with the operating instructions. Operation
of Mastertech II VCI in a residential area
is likely to cause harmful interference, in
which case the user will be required to cor-
rect the interference at his or her expense.
i
All changes or modification
to the Mastertech II VCI that
are not expressly allowed by
Bosch Automotive Service Solutions, Inc.
can result is loss of permission to oper-
ate Mastertech II VCI.
2.3
Open-source software
(OSS)
For an overview of the open-source soft-
ware licenses, see the text files located in:
"C:\PROGRAM FILES (X86)\BOSCH\VTX-
VCI\VCI SOFTWARE (6531-BOSCH)\LEGAL".
2.4
Electromagnetic compatibility
(EMC)
The Mastertech II VCI satisfies the require-
ments of the EMC directive 2014/30/EU.
i
Mastertech II VCI
product in accordance with EN 61 326.
The
Mastertech II VCI
high-frequency household interference
(radio interference) so that interference
suppression may be necessary. In such
cases, the operator may be required to
take appropriate action.
2.5
Range of application
The Mastertech II VCI is intended for indoor
use only.
Bosch Automotive Service Solutions, Inc.
is a class/category
A
may cause
Publicidad
Tabla de contenido
