Miche 966 WP AXY Manual De Uso Y Mantenimiento página 7

• Centre the second bearing in line with the axel and fit it using a push
bearing that is big enough to contain the axel itself.
• Insert the chamber on the axel making sure that the support bra-
ckets are also be installed correctly (Pic. 3)
Check that the wheel turns freely.
Warning
!
Use original spare parts exclusively provided by Fac di Michelin.
Any modification or alteration (also graphic) of the product with
non-original spare parts or spare parts not delivered directly by
Fac di Michelin, involves the expiration of the guarantee.
REAR HUB
The rear hub requires cleaning and lubrication of the ratchets in
the freewheel body.
For any maintenance:
• Insert allen wrentch 12mm (M) on right side of the hub (Pic. 4).
• Using adjustable wrentch, unscrew left stop (O)
• Extract the axel of rear hub with the freehub body (c). if necessary
• at this point you can:
- Change the bearings.
- Grease the cogs with low density grease.
- Extract from the axel the freehub body with the relative spacer (Z)
continue the cleaning process of hub. Warning: the bearings of the
freehub body cannot be replaced.
• Re-fit the axel (C) inside hub body with the spacer (Z) (Pic. 5). Take
care to position of the pawls. - Insert allen wrentch 12mm(M) on right
side of the hub.
• Stopping left stop (O) with adjustable wrentch (N) locking at 15 Nm
(Pic. 6)
• If necessary adjust the hub by working on the ring (H) (Pic. 6):
• Unlock the grub screw (I) with a allen wrentch 2mm (L) (Pic. 6).
• Turn the ring in clock sense to drop the sliding, and in anti-clock
sense to rise the sliding.
• Lock the grub screw (I) (1,4Nm) (Fig. 6).
• Check the sliding of the wheel.
Please check that the hub is correctly tightened and closed, failure
to do so could lead to a serious or fatal accident.
Warning
!
Use original spare parts exclusively provided by Fac di Michelin.
Any modification or alteration (also graphic) of the product with
non-original spare parts or spare parts not delivered directly by
Fac di Michelin, involves the expiration of the guarantee.
SPOKES
3
The spokes used for the assembly of the Wheels have the following
sizes and characteristics:
966 WP AXY
Right side (opposite side to the disc) 299 mm
Left side (disc side)
CHANGE A SPOKE
Warning
!
If you have any doubt whatsoever your service-repair ability, please
take your bicycle to a qualified repair shop.
Before any maintenance operations on your wheels, always wear
gloves and protection glasses.
Use only spokes and nipples of the same length and characteristics
of those to be replaced.
Use original spare parts exclusively provided by Fac di Michelin.
To replace a spoke on the 977 is extremely easy in both cases, front as
well as rear wheels.
• Unscrew the spoke from the nipples with the corresponding span-
ner.
• Once it has been unscrewed, slide off the spoke from its own seat.
• Insert the new spoke.
• Screw nipple with washer.
Draw the spoke to be used for the replacement in the thread-locker
you chose to improve sealing.
To ensure the correct spoke tension please follow the indications be-
low:
• Correct spoke tension for front wheel (disc side) 1000N
• Correct spoke tension for rear wheel, free wheel side 1300N
To evaluate the correct wheel tension, please use a professional spoke
tension gauge, we do not recommend that spoke tension is estimated
manually; please refer to a professional cycle mechanic if you do not
own a professional spoke tension gauge. The correct spoke tension is
essential to ensure a ridged and durable wheelset.
ATTENTION in correct spoke tension, too high or too low, could lead
to wheel failure and resulting serious or fatal accident.
In sections 4, 5, 6 you will find useful information on how to fit tu-
beless ready tires
Rear wheel Front wheel
300 mm
300 mm 299 mm
7