auna Connect Vertical Manual Del Usuario página 56

EN
56
Network wizard
PBC Wlan setup
View settings
Manual settings
NetRemote
PIN Setup
Network profile
Clear network
Keep network connected
3. Press the BACK button on the remote control to return back to the
previous menu
Time/Date
The Time/Date can be automatically set once it has been connected to
Internet, DAB or FM radio station
with time/date information. You may also adjust the Time/Date manually.
Press the CLOCK button to access Time/Date menu.
Alternatively, during System settings mode, press
Time/Date and press SELECT button to confirm. Press
select Set Time/Date and press SELECT button to confirm.
1. The date digits will flash on the display.
2. Press / buttons to adjust the day and press SELECT button to
 
confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now completed.
For the other settings under Time/Date, press 12 / w / 3 / s buttons to select
the following options and then press SELECT button to confirm
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network
with DHCP enable/disable.
Press the WPS button on the modem device
that you wish to connect with. Press the
SELECT button on unit or remote control to
continue.
Display the setting on the unit.
Select DHCP enable/disable.
To define a PIN number to be entered before
being able to connect to the unit
remotely over a network.
View the connected network.
To delete the connected network memory in
Network profile.
To define whether remains connected to its
network in Standby mode and when
not in Network radio mode. This is necessary
for remote operation.
/

, buttons to select

/ buttons to
 