Usb Operation; Bt-Operation - auna Connect Vertical Manual Del Usuario

EN
USB
70

USB OPERATION

1. There is an USB socket located at the back of the unit. When a USB
device is connected to the unit, press the MODE button on unit or
remote control repeatedly to select USB mode.
2. The unit will automatically playback the tracks.
3. All playback features are the same as if you were playing an MP3 CD.
Note: The unit can only play MP3 file formats in USB operation. The unit
can support USB devices with up to 32GB of memory. The unit may not
compatible with all USB devices; this is not an indication of a problem of
the unit.
Charge Your Device
You can charge your device through the USB socket on this unit with a USB
cable (not supplied).
• The maximum current for USB charging is 1A.
• All devices for USB charging are not guaranteed.

BT-OPERATION

The unit has a BT function that can receive a signal within 8 meters. Pairing
the unit with a BT device to listen to music:
1. Press MODE repeatedly on the unit or on the remote to select BT Audio
mode.
2. If the unit is not paired with any BT device, the display will flash " BT ".
3. Activate your BT device and select the search mode.
4. "Connect Vertical" will appear on your BT device list.
5. Select "Connect Vertical" and enter "0000" for the password if
necessary.
6. To disconnect the BT function, switch to another function on the unit or
disable the function from your BT device.
Playing Music via BT
You may need to adjust the volume on your radio and BT device.
• Press the 1/2 button on unit or the
pause music or
• Press /  buttons on unit or remote control to skip to the previous/
next track.
button on remote control to play/

