auna Connect Vertical Manual Del Usuario página 57

Auto update
Set format
Set timezone
Daylight savings
Hint: The default auto time update setting is "Update from Network". If
you would like to manual set the time, it is recommended to turn the Auto
update function off.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play
mode.
1. During System settings mode, press the
Standby and press SELECT button to confirm.
2. Press / buttons to select between Off, 2 hours, 4 hours, 5 hours and
 
6 hours. Press SELECT button to confirm.
Language
1. During System settings mode, press
and then press SELECT button to confirm.
2. Press / buttons to change the display language of your choice.
 
3. Press SELECT button to confirm.
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again. If you move to
canother part of the country and pick up the local and national DAB stations
in that area, your previously tuned channels may no longer be available.
1. During System settings mode, press
reset, and press SELECT button to confirm.
2. Press / buttons to select [ Yes ], and press SELECT button to confirm.
 
Or select [ No] to cancel.
Note: After the system reset, all the tuned stations, DAB & FM preset
stations will be erased.
Update from DAB / FM / Network / No
update
12 / 24 hour format.
Select a time zone. (Only available when
Auto update from Network is on.)
Select daylight savings. (Only available
when Auto update from Network is on.)
/ buttons to select Inactive
 
/ buttons to select Language
 
/ buttons to select Factory
 
EN
57