Connecting An Automatic Gate Opener - Extel WEVP 440 BIS Instrucciones De Uso E Instalación

b. Connecting an electric strike or a lock
If an electric lock or strike is added to the installation, connect it to the two wires of the adapter on
the back of the roadside panel.
IMPORTANT !
This function is only available if the screen is in "video door phone" mode and by pressing the
key of the monitor.
It is advisable to use an EXTEL strike or lock with call memory, it will remain unlocked after the end
of the electric pulse.
c. Connecting an automatic gate opener
Connect it to the 2 wires of the adapter (WE 8111 BIS option) on the back of the roadside panel.
The roadside panel outputs a 12 VDC voltage, and then it is necessary to insert the WE 8111 BIS
option between the roadside panel and the automatic gate opener.
- The red and black wires of the WE 8111 BIS to connect to the roadside panel.
- The white wires of the WE 8111 BIS to connect to the external control of the automatic gate
opener.
IMPORTANT !
This function is only available if the screen is in "video door phone" mode and by pressing the
key of the monitor.
CONTROL OF A STRIKE
OR LOCK
4
1 2 3
CONTROL OF
OR
AN AUTOMATIC GATE OPENER
7EN
* option