Ifill Oxygen Cylinder/Regulator; Typical Questions And Answers; Cleaning/Maintenance Devilbiss Ifill Personal Oxygen Station Filter; Cleaning & Maintenance - DeVilbiss Healthcare iFill Guía De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13

iFill Oxygen Cylinder/Regulator

Problem
Hissing sound from iFill oxygen
cylinder
iFill oxygen cylinder is on but
oxygen is not being delivered.

TYPICAL QUESTIONS AND ANSWERS

Q. Why does my iFill make a "pop" sound when I remove the cylinder?
A.
The "pop" sound is pressure being released from the system to make the next cylinder easier to install.
Q. Why is the coupler only to be cleaned with a clean, dry, lint-free cloth and only when necessary?
A.
Cleaning solutions may be flammable and/or may contaminate the cylinder.
Q. Why can't I use my old cylinders with the iFill?
A.
The iFill has a proprietary connection as required by the Food and Drug Administration (FDA) and, therefore, other cylinders are not compatible.
CLEANING/MAINTENANCE
DeVilbiss iFill Personal Oxygen Station Filter
CAUTION
1.
Do not operate the personal oxygen station without the filters installed.
2.
No lubricants other than those recommended by the manufacturer are to be used.
NOTE – The DeVilbiss iFill Personal Oxygen Station has two (2) filters, one on each side of the cabinet (FIGURE A).
NOTE – Perform this procedure at least ONCE A WEEK.
1.
Unplug the personal oxygen station from the wall outlet.
2.
Remove the filters.
3.
Clean the filters with a vacuum cleaner or wash in warm soapy water and rinse thoroughly.
4.
Dry the filters thoroughly before reinstallation.

Exterior Cabinet

WARNING
Electric Shock Hazard: Unplug the DeVilbiss iFill Personal Oxygen Station when cleaning. Do not remove the oxygen station cabinet. The cabinet should only be removed
by a qualified DeVilbiss technician. Do not apply liquid directly to the cabinet nor utilize any petroleum- based solvents or cleaning agents.
1.
Clean the exterior cabinet by using a damp cloth or sponge with a mild house hold cleaner and wipe it dry.
2.
Only if necessary, wipe the coupler with a clean, dry, lint-free cloth.
Cleaning
Recommended cleaning
interval
Air Intake Filters
Once per week
Exterior Cabinet
Once per week
* number of cleaning cycles determined by recommended cleaning interval and 5-year expected service life
Maintenance
Air Intake Filters
Final Bacteria Filter
Oxygen Concentration
Audible and Visual Indicators
Compressor
Intensifier
EN - 10
Solution
1. Turn rotary selector OFF.
2. If hissing sound continues, call your DeVilbiss provider.
1. Check oxygen contents gauge. Refill cylinder if the gauge shows empty.
2. Check that cannula tubing is straight and not pinched. If damaged, replace.
3. Call your DeVilbiss provider for service.
Number of cleaning
cycles *
260
260
Inspection Interval
Once per week
Inspect in conjunction with compressor service
3 years
3 years
3 years
3 years
Compatible cleaning agents / max washing temperature
Clean with vacuum cleaner or wash in warm soapy water
Clean with a damp cloth or sponge with a mild household cleaner and wipe it dry
Replacement Interval
If torn or damaged
Replace as necessary
N/A
N/A
N/A
N/A
Specification
20 PPI; gross particle filter
> 0.3 micron particles
93% ±3% O2
Audible Alert and LED Indicators
30 psi max output
2200 psi max output
SE-535I

Publicidad

Tabla de contenido
loading

Tabla de contenido