AstroNova QuickLabel QL-850 Guia De Inicio Rapido página 13

Ocultar thumbs Ver también para QuickLabel QL-850:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

9.
Loosen the thumbscrew on the adjustable media guide [6] and slide the guide to the width
of the media. The edges of the media should lightly contact the edges of the fixed media
guide [7] and the adjustable media guide [6]. Tighten the thumbscrew on the adjustable
media guide [6].
10. Slowly guide the media into the printer as illustrated. You will feel slight resistance as the
media enters the roller area. Make sure there is no excessive slack in the media during this
process.
11. The printer will beep three times to indicate the media has been detected. Release the
media when the printer starts automatically feeding it into the printer. The printer will feed
media and the loading process will be complete.
Note: If the automatic media feeding process fails, the media will be ejected back out of the
printer. If you experience multiple loading failures, use the alternate manual feed method
described in the QL-850 User Guide.
Next Steps
You have finished setting up the printer. Please refer to the QL-850 User Guide to set up the
printer driver, configure optional QuickLabel software, and begin printing labels.
Visit www.QuickLabel.com for video tutorials on setting up and using the QL-850 printer.
QL-850 Quick Start Guide
11

Publicidad

Tabla de contenido
loading

Tabla de contenido