3.
Choose After Shipping. Follow the on-screen instructions to complete this procedure. This
wizard will guide you through the following actions.
•
Preparing the Maintenance Roller
•
Installing Ink Cartridges
•
Installing the Printhead
These procedures are detailed in the following sections.
Preparing the Maintenance Roller
1.
Open the top cover and remove the cinch strap [1].
2.
Remove the foam support block [2] from the printer. Use caution when removing the block
to avoid dislodging the maintenance roller assembly.
Save the foam support block and strap for future shipping purposes.
3.
Verify that the maintenance roller assembly is level and installed properly. Make sure both
ends of the roller are snapped into place.
QL-850 Quick Start Guide
5