4.2
Securely attach the Hanger Bracket to the Outlet
Box using the Two Screws supplied with the Outlet Box
(Figure 16).
4.3
Carefully lift the Fan and seat the Hanger Ball/
Downrod Assembly on the Hanger Bracket that was
just attached to the Outlet Box (Figure 17).
Be sure the Groove in the Ball is engaged with the
Anti-Rotation Tab on the Hanger Bracket (Figure 17).
WARNING
!
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
Figure 16
Figure 17
12
OUTLET
BOX
HANGER
BRACKET
ANTI-ROTATION TAB
ETL Model No.: CF235