3. Ceiling Fan Assembly
(Continued)
3.5
Carefully turn the partially assembled Ceiling Fan right
side up and place the Fan securely into the packing
styrofoam.
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the 4.5" Downrod (Figure 5).
Remove the Pin from the 4.5" Downrod, then remove
the Hanger Ball (Figure 5).
Retain the Pin and Hanger Ball for reinstallation in
Figure 5
Step 3.12.
NOTE: Do not loosen the Screw that attaches the
Green Ground Wire to the Hanger Ball.
3.6
THREE 80" MOTOR
Separate, untwist and unkink the Three 80" Motor
LEADS (UNTWISTED)
Wires.
Route the Three 80" Black, Blue, and White Motor
Wires through the 4.5" Downrod (Figure 6).
4.5" DOWNROD
Figure 6
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
7
ETL Model No.: CF235