Preparing For Pumping; Mains Operation - Medela Freestyle Manual De Instrucciones

6. Preparing for pumping

Warning
16
l re 6.1 Mains operation:
Follow the exact order of the steps.
l Only use the mains adapter supplied
with the Freestyle breastpump.
l Make sure the voltage of the mains
adapter is compatible with the
power source.
Note
l Do not use force to push the battery
into the battery compartment.
I Do not insert the battery while pump
is on mains.
i
Info
l If the pump has been running for
30 minutes without any manipula-
tions, the Freestyle will automatically
switch off.
l re 6.2 Battery operation:
If possible, do not remove the battery
from the motor unit again.
l Removing the battery requires a
charging time of up to 24 hours.
l The pump can be used during
charging. Do not disconnect the
mains adapter until charging is
complete.
l The battery is charging as soon as
the pump is connected to a power
source (even if the pump is not in
use).

6.1 Mains operation

1
Plug the mains adapter cord
into the motor unit.
2
Insert the battery in the
direction shown by "This side
down" so that the gold con-
tacts on the battery touch the
gold contacts in the device.