Error Codes - smartheart 01-509 Manual De Instrucciones

ERROR CODES

Problem Symptom
No Power Display will not
light up.
Low
Display is dim or
Batteries shows
E 1
E 2
Error
Messages
E 3
E 10
E 11
E 20
E 21
Eexx
IF AN ERROR CODE PERSISTS OR IS NOT REMEDIED,
PLEASE CONTACT CUSTOMER CARE AT 866-326-1313.
Check This
Power is exhausted.
Power is low.
The cuff is not secure.
The cuff is very tight.
The pressure of the cuff is
excess.
The monitor detected motion,
talking or the pulse is too
poor while measuring.
The measurement process
does not detect the pulse
signal.
The treatment of the
measurement failed.
A calibration error occurred.
Remedy
Charge the power.
Charge the power.
Refasten the cuff, relax for a
moment and remeasure.
Readjust the cuff, not too
loose or tight. Remeasure.
Relax for a moment and
remeasure.
Relax for a moment and
remeasure.
Loosen the clothing on the
arm and then remeasure.
Relax for a moment and
remeasure.
Retake the measurment. If
the problem persists, contact
the retailer or customer
service for futher assistance.
ENGLISH • 29