Setting Date/Time - smartheart 01-509 Manual De Instrucciones

SETTING DATE/TIME

The date/time feature is on the bottom
of the display screen. This unit stores
the date, time and year allowing for a
date/time stamp on all readings in the
memory recall function. The date/time
alternate view while in use.
The switch at the top of the device must
be on the ON position to set the date
and time feature.
HOW TO SET DATE AND TIME
1. When the unit is off (a blank display screen), press and hold the U1/SET
button for 3-5 seconds to enter clock setting mode.
2. HOURS/MINUTES—first the hour will flash on the display. Press the
MEMORY button to advance the display to the desired hour, press the U1/
SET button to confirm your selection and advance to the minute setting. Press
the MEMORY button to advance to the correct minute, press U1/SET to
confirm.
3. MONTH—next the Month will flash on the display. Press the MEMORY
button to advance the display to the desired month, press the U1/SET button
to confirm your selection and advance to the date settings.
14 • ENGLISH
MEMORY
Recall Button
The MEMORY RECALL and U1
buttons are necessary for setting the
date/time of this device.
1 2
U1/SET U2
Button Button