Belt Adjustment; Technical Details; Warranty And Technical Support - cecotec TIT EXTREMETRACK Guia Do Usuário

ENGLISH

BELT ADJUSTMENT

• Place the treadmill on an even surface.
• Run the treadmill at 6-8 km/h.
• If the belt has drifted to the right, turn the right bolt clockwise 180° and turn the left
bolt counter-clockwise 180° (picture C).
• If the belt has drifted to the left, turn the right bolt counter-clockwise 180° and turn the
left bolt clockwise 180° (picture D).
· Test for at least 15 seconds at 4 km/h (check and adjust 90° or 180° until the belt is cen-
tred).
NOTE: The running belt should not be tightened too hard as this can cause noise and
damage the machine.
STORAGE:
Remember to store the treadmill in a dry place and not to pile things on top of it.

TECHNICAL DETAILS

Power: 3 hp
Speed: 1-18 Km/h
Running surface: 42 x 130 cm
Dimensions: 165 x 72 x 130
Weight: 62 kg
Max. user weight: 120 kg
26

WARRANTY AND TECHNICAL SUPPORT

1. This product has a 2-year warranty from the date of purchase, as long as the purchase
invoice is properly kept and submitted, the product is in perfect condition, and it has
been correctly used, as indicated in this manual.
2. The warranty does not cover:
· A product that has been used beyond their capacity or utility, battered, beaten, ex-
posed to moisture, soaked on any liquid or corrosive substance, as well as any other fault
attributable to the consumer.
· A product that has been disassembled, modified or repaired by persons not authorized
by our official Technical Support Service.
· Whenever the problem is caused by the normal wear and tear of its components.
3. If at any time a problem with the product is detected, you should contact the official
Technical Support Service from Cecotec, and send the purchase invoice of the product
via e-mail to the following address:
sat@cecotec.es
ENGLISH
27