Changing The Battery Pack; Technical Details - Spasciani Turbine 170 Breve Manual De Instrucciones

5.3. Changing the battery pack
To change the battery pack remove the 4 screws (7) that attach it to the main body of the ventilation unit.
6. STORAGE, CONSERVATION AND TRANSPORT
The materials used have excellent anti‐ageing characteristics, and therefore one does not need to take any special
precaution in the conservation of the device, however it is advisable to keep the respirators in their original
packaging in well ventilated warehouses, away from chemical vapours and from any heat source, within a
temperature range of ‐20 °C and + 50 °C and in less than 80% humidity (refer to the pictograms shown on the sales
package, on the TURBINE 170 and at the end of these instructions).
The devices, stored in their original packaging, do not require any particular care during transport, however it is
advisable to observe the general guidelines already outlined for storage.
7. TECHNICAL DETAILS
 TURBINE 170 ventilation unit
‐ Air flow rate with different types of filters: 130 l/min; 170 l/min
The air flow rate is stabilised by an anemometric device (wind gauge) which regulates the speed of the ventilator
independently from the battery's residual tension, thus optimising the duration.
‐ Recommended functioning temperature: between ‐20°C and +50°C with U.r. < 80%
‐ Duration: about 9 hours with a flow rate of 170 l/min and anti‐dust filters, and around 7 hours with a flow rate of
130 l/min and combined filters
 Battery pack
‐ Type: Lithium polymer
‐ Nominal voltage: 14.8 Volt
‐ Charging time: about 3.5 hours
 Battery charger
‐ Network power:
‐ Frequency:
‐ Operating temperature:
‐ Storage temperature ‐40 +85 °C
‐ The red LED indicator indicates the battery is charging, green indicates the battery is charged.

Masks TR 82 – TR 2002
Conforming to standard EN 136:98. Refer to specific instructions provided with the product.

Helmets/Hoods CFU Helmet with visor, FU Light Visor, H Tyvek® Hood F
Conforming to standards EN 166 and EN 397 (only for the model CFU Helmet with visor). Refer to specific
instructions enclosed with the product.
8. PRODUCTION AND MARKING DATE
The CE mark, followed by the identification 0426 of the Notified Organisation (Italcert S.r.l., Viale Sarca, 336 ‐ 20126
Milano), which has carried out the type tests for the CE certification, and which carries out the production control
according to Art.11.B D.E. 89/686/EEC, can be found on the label attached to the base of TURBINE 170 (example A).
The same label displays the devices which the TURBINE 170 is part of, respective standard references and a serial
number (SN) which is composed as follows: mm (production month) / yyyy (production year) – T‐nnn (progressive
serial number). A sticker is attached to the battery pack (example B) with the code number and the production date.
Examples C display the filter labels 100 P3 R, 202 A2B2E2P3 R and 202 A2B2P3 R.
The year of production is displayed on the breathing tube.
AVERTISSEMENT
Seul le respect strict des règles du présent manuel peut garantir le bon fonctionnement et une utilisation en toute
sécurité des ventilateurs à filtre TURBINE 170. SPASCIANI SPA décline toute responsabilité pour tout dommage
susceptible de se produire en raison de l'utilisation inadéquate ou erronée des ventilateurs à filtre TURBINE 170, il en
va de même pour les entretiens ou réparations qui ne sont pas effectués dans les ateliers de l'entreprise ou par des
tiers explicitement approuvés par l'entreprise elle‐même. Veuillez noter que l'appareil de protection respiratoire
doit être utilisé par du personnel formé à cet effet et sous la supervision et la responsabilité de personnes qui sont
parfaitement conscientes des limites de l'application et de la législation en vigueur.
L'utilisation d'accessoires ou de pièces non d'origine est interdite et annulera la garantie de l'appareil respiratoire.
100‐240Vac
50‐60 Hz
‐10 +50°C
FR MANUEL D'UTILISATION
10 / 20