Compartments And Filters - Amibot PURE LASER Manual Del Usuario

EN
Maintenance

Compartments and filters

Dustbin
2
1
You should empty the dustbin every time the robot completes a
cleaning cycle. Remove the robot's dustbin by pressing the release
button and empty it by opening the cover located on the robot's
underneath.
Then check that there is no dirt obstructing the robot's vacuum
system.
Filters
Open the dustbin to access the filters and clean them.
1. The HEPA filter cannot be cleaned, otherwise it would
become damaged. To extend the filter's life, gently shake it
outside to remove any small dust particles that may have
gathered. If the HEPA filter is damaged, it is advisable to
replace it to keep up the efficiency of the robot's filter.
2. Carefully shake the prefilter and protection filter to remove any
dust particles and rinse it with clean water. Let them completely
dry before putting them back in the dustbin.
22